1、 Wire drawing hub repair has very strict processing requirements. Generally, the drawing hub needs to be renovated and repaired in a professional repair shop or hub drawing factory.
2、Wire drawing hub is not recommended to repair the modified wire drawing hub because the edge of the modified hub is relatively thin and its performance is not as good as that of the original wheel hub. If the wire drawing process is selected for repair, the service performance of the hub may be affected. If you want to achieve a brushed wheel hub, you need a professional wheel repair lathe. Our website has a large number of practical wheel CNC lathes for you to choose from.
If the scratch of the wire drawing hub is not serious but only slightly scratched, you can use sandpaper to polish it to the same luster as the original. If the scratch area is large, you can also use the special sticker for the wheel hub and stick it directly. For serious scratches, it’s better to go to the 4S store or auto repair shop and use a professional wire drawing machine to repair them.
The wheel hub is scratched, which has little impact on the safety of the car but seriously affects the beauty of the car. When there are stains on the wheel hub surface that are difficult to remove, a professional cleaning agent should be selected. This cleaning agent can gently and effectively remove the stains and reduce the damage to the aluminum alloy surface. In addition, there is a layer of metal protective film on the hub itself, so pay special attention not to using paint brightener or other abrasive materials during cleaning. Be careful during driving to avoid “hard injury” to the wheel hub caused by scraping. Once there is a scratch or deformation, it should be repaired and repainted as soon as possible.
The daily maintenance of the wheel hub is also very important. When the temperature of the wheel hub is relatively high, do not clean it with cold water. Clean it after spontaneous combustion and cooling. In addition, if the wheel hub is cleaned with detergent at a high temperature, it is easy to cause a chemical reaction on the surface of the wheel hub, which may lead to loss of luster and damage to the wheel hub.
